SAE AMS5663 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5ni 19cr 3.0mo 5.1cb 0.90ti 0.50al
时间:2024-05-18 18:05:40 来源: 标准资料网 作者:标准资料网 阅读:8533
Product Code:SAE AMS5663
Title:Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5ni 19cr 3.0mo 5.1cb 0.90ti 0.50al 19fe Consumable Electrode Or Vacuum Induction Melted 1775Mdf (968Mdc) Solution and Precipitation Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
- 上一篇:SAE AMS5879 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb, Cold Roll
- 下一篇:SAE AMS5708 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58ni 19.5cr 13.5co 4.3mo 3.0ti 1.4al C
【英文标准名称】:RequirementsforProcessSealingBetweenElectricalSystemsandFlammableorCombustibleProcessFluids
【原文标准名称】:电气系统与易燃或可燃加工液体之间的工艺密封的要求
【标准号】:ANSI/ISA12.27.01-2011
【标准状态】:现行
【国别】:美国
【发布日期】:2011
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Combustible;Electrical;Electricalengineering;Flammable;Fluids;Sealing
【摘要】:Thisdocumentprovidesspecificrequirementsforprocesssealingbetweenelectricalsystemsandflammableorcombustibleprocessfluidswhereafailurecouldallowthemigrationofprocessfluidsdirectlyintotheelectricalsystem.
【中国标准分类号】:K04
【国际标准分类号】:13_260;23_020_01;29_020
【页数】:
【正文语种】:英语
基本信息
标准名称: | 同步电机励磁系统大、中型同步发电机励磁系统技术要求 |
英文名称: | Excitation system for synchronous electrical machines—Technical requirements of excitation system for large and medium synchronous generators |
中标分类: |
电工 >>
旋转电机 >>
同步电机 |
ICS分类: |
电气工程 >>
旋转电机 >>
发电机
|
替代情况: | 替代GB/T 7409.3-1997 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2007-01-16 |
实施日期: | 2007-08-01 |
首发日期: | 1987-03-16 |
作废日期: | |
主管部门: | 中国电器工业协会 |
提出单位: | 中国电器工业协会 |
归口单位: | 全国旋转电机标委会发电机分技术委员会 |
起草单位: | 哈尔滨大电机研究所、中国电力科学研究院、东方电机股份有限公司、上海汽轮电机有限公司等 |
起草人: | 徐福安、赵红光、胡瑜、李国良、汪大卫等 |
出版社: | 中国标准出版社 |
出版日期: | 2007-08-01 |
页数: | 平装16开 页数:8, 字数:13千字 |
计划单号: | 20032621-T-604 |
适用范围
本标准规定了同步发电机及调相机励磁系统的技术要求、试验项目、标志与包装等。
本标准适用于电力系统连接的10MW及以上的水轮发电机、50MW及以上透平型同步发电机和调相机的励磁系统。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 电工 旋转电机 同步电机 电气工程 旋转电机 发电机